Marine
RV/Camping
Residential
Construction
Aviation
Industrial

Features

INSITE i2 BASE MODEL
TRACKING
MESSAGING
INPUT MONITORING FUNCTIONS
REMOTE CONTROL OUTPUTS
TELEMETRY
OTHER FEATURES
TECHNOLOGY
INSITE i2 BASE MODEL
Dimensions: 3"x5"x 1.3"
(78mmx130mmx34mm)
External markings to identify nature of product. YES


TRACKING
Optional built-in GPS gives GPS location delivered by SMS. YES
Antenna type GPS puck antenna on 10 ft.
(3M) cable.
Current asset position can be polled at any time from use's mobile phone. Device will respond with Lat. and Long. info, speed and course. Position is delivered as a hyperlink for instant plotting onto Google Map. YES
via keyboard and LCD display.
Factory presets most settings but user can modify as required. YES


MESSAGING
Direct Insite to mobile phone SMS Service. No message center, no monitoring fees, no GPRS servers, no internet and no phone lines required. YES
Prepaid cards are supported YES
Messages are user-changeable YES
via keyboard and LCD display
Sends SMS message to 4 recipients.
(On and Off)
4 recipients per switch state.
Over 100 in total
Additional CALL ESCALLATION sends to an additional 8 recipients after a user - programmed time delay. Any recipient can cancel message sequence from mobile phone, with confirmations. YES
Back to Top


INPUT MONITORING FUNCTIONS
Any contact opening or closing can be sensed. Factory switch assignments deliver appropriate messages. YES
with multi level user-programmable delay.
Number of external inputs 8
All messages are factory defaulted but easily changed by user YES
Charger Voltage Low and normal alarm. With four-level user-programmable Hysteresis.
Back to Top


REMOTE CONTROL OUTPUTS
Output 1 Has RELAY built-in to the OPTIONAL docking cradle that can switch 12vDC 1 amp loads.
Output 2 Has RELAY built-in to the OPTIONAL docking cradle that can switch 12vDC 1 amp loads.
Outputs 3, 4 & 5 100 mA max signal outputs only and require external relays to provide power controls in OPTIONAL Docking Cradle.
Output 6 100 mA max signal outputs only and require external relays to provide power controls in OPTIONAL Docking Cradle.
Back to Top


TELEMETRY
Telem#1: Analogue signals in the range 0 to 3v can be sampled.
Telem#2: Analogue signals in the range 0 to 3v can be sampled.
Back to Top


OTHER FEATURES
Six system-Status screens YES
Removable GSM antenna YES
Secure system only allows user-registered mobile phones to operate on system YES
Four (4) phone number call directory YES
for each switch state
Built-in temperature sensor delivers SMS of temp in C/F degrees Range -20C to 55C. Also Max & Min recorded temp over set period. With 4-level user-programmable hysteresis.
Temperature sensor location Internal
Temperature (Low/Normal/High) alarms factory set, user adjustable YES
Internal Backup battery voltage delivered by SMS YES
Periodic Status (STAT) reports delivered by SMS YES
All Latitude and Longitudes delivered as Google Map hyperlinks YES
Power loss and Power recovery alarm delivered by SMS YES
INSITE FLEET (Registered) asset management-system ready. Can monitor, control, and track 800 + assets YES
Door alarms with password entry delay YES
SYSTEM Password YES
Door entry password YES
Fully supervised WiPAN wireless sensors with battery level and heartbeat reporting YES
Built-in Wireless Personal Area Network (WiPAN). Accepts up to 8 wireless sensor digital inputs
Back to Top


TECHNOLOGY
Quad Band GPS 850MHz/ 900MHz) 1800MHz/1900MHz YES
External Connections Via built-in Wireless Personal Area Network or hard wired using optional docking cradle
Power supply 9v to 16v DC
Standby Battery 1,800 mAH Li Ion built-in
Back to Top
Go to the Pricing page.